Ribbed Tray, 185×90×12mm (5-Rib Fixed Version)
A shallow ribbed tray (185×90×12mm) for organizing small flat items, with 5 evenly-spaced parallel ribs dividing the tray into compartments.
⚠ Partial coverage — see notes below✓ Digitally validated
Key dimensions
| X | 185 mm |
| Y | 90 mm |
| Z | 12 mm |
About this model
Real demand pattern for parametric ribbed trays where the original request wanted user-adjustable rib count/spacing. This asset is a single fixed instance of that idea, not the adjustable tool itself -- see "Known limitations" below.
Fit notes
- 5 ribs, evenly spaced (a reasonable single instance, not a specific requested count)
- 1.6mm wall thickness
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Partial — this model covers part of the stated requirement. See what's missing below.
- • User-adjustable rib count/spacing. The original demand was for a customizable/parametric tool where a user picks their own rib count; this object is one fixed 5-rib instance, not that tool.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- box-02
- Category
- organizers
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/box-02/sha256/2c5218df40c268a0f02bfd108a0a0d7ae8318955735089c8c4e0a1284f2eb606.stl
- STEP file
- /artifacts/objects/box-02/sha256/ae64893a3a9940ae28481cf2de3cd5a59241d3caa4c4ce7738dadcd2154ab93c.step
Similar objects
Manga Slipcase for 135×15×215mm Book
A protective slipcase sized to slide over one specific book/manga volume (135mm deep, 15mm thick, 215mm tall), so it fits snugly instead of using a generic case that's the wrong size for this exact volume.
137×17×216mm
Business Card Tray — Standard 88.9×50.8mm Card Stack
A shallow open tray sized to hold a flat stack of standard US/Canada business cards (88.9×50.8mm), for a reception desk or drawer -- a flat stacking tray, not an upright display stand.
95×57×15mm
Playing Card Deck Box — 2-Deck Poker-Size Tray
A flat storage box that holds two standard poker-size playing card decks (63.5×88.9mm each), side by side in separate compartments, for card players and board-game collections that overflow their original paper boxes.
95×143×20mm