Craft Embroidery Floss Bobbin
Flat winding bobbin for one embroidery-floss length, with opposed end notches for parking loose ends.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 50 mm |
| Y | 32 mm |
| Z | 2.4 mm |
About this model
Hypothesis: this established craft workflow may benefit from a small dedicated tool. No query, request, or sales volume was independently collected.
Fit notes
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
- Fixed digitally testable design premise; no brand fit, calibration, or physical-use claim.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical sample was made.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- craft-embroidery-floss-bobbin
- Category
- crafts
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/craft-embroidery-floss-bobbin/sha256/d35b103685fb400eac7f5984aa93cc253203a8915e22fe58a95fb6c24e9040da.stl
- STEP file
- /artifacts/objects/craft-embroidery-floss-bobbin/sha256/d158116e47fe4690ae26019812d118bfda4918b90927153d8ccc0a4009f44901.step
Similar objects
Craft Bias Tape Folding Guide
Fixed tapered channel guides flat fabric toward a narrower exit while the user folds it by hand.
82×38×10mm
Craft Card Corner Radius Stencil
Tracing plate provides four concave corner arcs for marking rounded card corners before hand cutting.
82×58×2.4mm
Craft Cross Stitch Thread Sorter
Flat card separates up to twelve cross-stitch thread lengths in edge-open hanger channels.
92×48×2.4mm
Craft Knitting Needle Gauge Card
Compact knitting-needle card compares shaft diameters using eight separated nominal openings.
112×28×3mm