10ml Boston Round Bottle Holder — 12-Bottle 3×4 Rack
A rack that holds 12 standard 10ml Boston Round bottles (the common format for e-liquid, dropper, and cosmetic bottles) upright and organized in a 3×4 grid, in a count between the 10-bottle and 21-bottle products sold as ready-made holders.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 116 mm |
| Y | 87 mm |
| Z | 28 mm |
About this model
Real vape/e-liquid bottle holder listings sell fixed 10-bottle and 21-bottle counts. 12 sits between them -- real demand for a mid-size count the existing products don't offer. The bottle diameter is anchored to the "10ml Boston Round" packaging standard specifically (23.8-24.7mm per independent supplier specs), not a generic "10ml bottle" claim -- a generic 10ml bottle diameter varies too much across brands to safely assume a single fit-critical number, which is exactly why an equivalent candidate was left unresolved in an earlier batch.
Fit notes
- 24mm bottle diameter (10ml Boston Round standard, ~23.8-24.7mm per independent packaging-supplier specs) plus 1mm clearance
- 25mm pocket depth for the bottle base -- stabilizing, not full-height enclosure
- 3×4 layout (12 bottles), between the 10-bottle and 21-bottle products found
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- dropper-bottle-holder-10ml
- Category
- holders
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /objects/dropper-bottle-holder-10ml/model.stl
- STEP file
- /objects/dropper-bottle-holder-10ml/model.step
Similar objects
AA Battery Holder Tray — 30-Cell 5×6 Array
A tray that holds 30 AA batteries upright and organized in a 5×6 grid, for bulk battery storage in a count that doesn't match the fixed 16/20/25-count presets sold as ready-made holders.
117×97.5×33mm
AAA Battery Holder Tray — 24-Cell 4×6 Array
A tray that holds 24 AAA batteries upright and organized in a 4×6 grid, for bulk battery storage sized exactly to AAA's own diameter rather than a generic multi-size battery organizer.
93×62×28mm
C Battery Holder Tray — 15-Cell 3×5 Array
A tray that holds 15 C-cell batteries upright and organized in a 3×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
156×93.6×33mm
D Battery Holder Tray — 10-Cell 2×5 Array
A tray that holds 10 D-cell batteries upright and organized in a 2×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
196×78.4×38mm