A six-cell seed-starting tray with full-height partitions and one drain hole per cell
A six-cell seed-starting tray with full-height partitions and one drain hole per cell.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 115 mm |
| Y | 88 mm |
| Z | 46 mm |
About this model
Hypothesis: gardeners need a reusable divided tray for separating six seed starts. No specific request or listing was independently collected in this lane.
Fit notes
- Six cells are separated by continuous internal walls.
- One 3.2mm drain opening per cell; no humidity dome or matching catch tray.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or fit sample was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- home-six-cell-seed-start-tray
- Category
- gardening
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/home-six-cell-seed-start-tray/sha256/5e59a84b4c104a7c68fadddc95e5320159c64551c4198c73f5c2849cdc3afc94.stl
- STEP file
- /artifacts/objects/home-six-cell-seed-start-tray/sha256/0ab0b84865fc1e733781b5927e82326ef97b64da1d80790d83d7a02673c25b70.step
Similar objects
A round tabletop herb planter with five open drainage holes through the floor
A round tabletop herb planter with five open drainage holes through the floor.
100×100×88mm
A shallow circular catch basin for collecting runoff beneath a small plant pot
A shallow circular catch basin for collecting runoff beneath a small plant pot.
122×122×9mm
A single square nursery pot with an open top and four floor drainage holes
A single square nursery pot with an open top and four floor drainage holes.
72×72×76mm