3D Printer Nozzle Holder Tray — 8-Nozzle 2×4 Array
A standalone tray that holds 8 standard M6 3D-printer nozzles (V6, MK8, and similar) upright and organized in a 2×4 grid, for makers who want their spare nozzles sorted without needing an existing Gridfinity system.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 43.2 mm |
| Y | 21.6 mm |
| Z | 10 mm |
About this model
Real Gridfinity-compatible nozzle organizer products exist and explicitly cite an 8-nozzle capacity at a 6.3mm hole diameter (7mm deep). This asset covers the simpler, non-Gridfinity form of that same underlying need -- it does not drop into an existing Gridfinity baseplate. See gridfinity-bin-usb-sd-storage's coverage note in this batch for why per-value Gridfinity compartments are a separate, harder problem.
Fit notes
- 6.3mm hole diameter, the standard M6 nozzle diameter (V6/MK8/Elegoo-style), per real nozzle-organizer product descriptions
- 7mm pocket depth, per a real nozzle-organizer product description stating holes '7mm deep'
- 0.5mm hole clearance -- a snugger fit than a typical holder, matching the tight tolerance real nozzle-holder products use so nozzles don't rattle loose
- 2×4 layout (8 nozzles), matching a real cited 'holds 8 print heads' product
- Standalone tray, not Gridfinity-format -- does not attach to or drop into a Gridfinity baseplate
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- nozzle-holder-tray-m6
- Category
- holders
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/nozzle-holder-tray-m6/sha256/deb1bba2aa3558db5e54ccafa9cb46fe0fa5964690757e8798756393810020a4.stl
- STEP file
- /artifacts/objects/nozzle-holder-tray-m6/sha256/afe46afa99026c5a4f0dcf289a095506b030bc4a9474339c9f6aa7733e569172.step
Similar objects
AA Battery Holder Tray — 30-Cell 5×6 Array
A tray that holds 30 AA batteries upright and organized in a 5×6 grid, for bulk battery storage in a count that doesn't match the fixed 16/20/25-count presets sold as ready-made holders.
117×97.5×33mm
AAA Battery Holder Tray — 24-Cell 4×6 Array
A tray that holds 24 AAA batteries upright and organized in a 4×6 grid, for bulk battery storage sized exactly to AAA's own diameter rather than a generic multi-size battery organizer.
93×62×28mm
C Battery Holder Tray — 15-Cell 3×5 Array
A tray that holds 15 C-cell batteries upright and organized in a 3×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
156×93.6×33mm
D Battery Holder Tray — 10-Cell 2×5 Array
A tray that holds 10 D-cell batteries upright and organized in a 2×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
196×78.4×38mm