Citadel Paint Pot Rack — 25-Pot 5×5 Array
A rack that holds 25 Citadel/Games Workshop-style paint pots upright and organized in a 5×5 grid, in a count that doesn't match the fixed 15/20-pot presets sold as ready-made racks.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 195 mm |
| Y | 195 mm |
| Z | 28 mm |
About this model
Real Citadel paint rack products (a 3D-printed modular hex rack and a simple shelf-based rack) sell fixed 15-pot and 20-pot presets. 25 falls outside both -- real demand for a count the existing presets don't cover, in a hobby (miniature painting) with an unusually large and well-documented community around exactly this storage problem.
Fit notes
- 34mm pot diameter, corroborated by a commercial '34mm Half for GW and Citadel Pots' rack product and paint-pot sizing articles (33-34mm range), plus 1mm clearance
- 25mm pocket depth (~55% of a ~45mm standard pot height) -- stabilizing, not full-height enclosure
- 5×5 layout (25 pots) -- a count outside the observed 15/20 presets
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- paint-pot-holder-citadel
- Category
- holders
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /objects/paint-pot-holder-citadel/model.stl
- STEP file
- /objects/paint-pot-holder-citadel/model.step
Similar objects
AA Battery Holder Tray — 30-Cell 5×6 Array
A tray that holds 30 AA batteries upright and organized in a 5×6 grid, for bulk battery storage in a count that doesn't match the fixed 16/20/25-count presets sold as ready-made holders.
117×97.5×33mm
AAA Battery Holder Tray — 24-Cell 4×6 Array
A tray that holds 24 AAA batteries upright and organized in a 4×6 grid, for bulk battery storage sized exactly to AAA's own diameter rather than a generic multi-size battery organizer.
93×62×28mm
C Battery Holder Tray — 15-Cell 3×5 Array
A tray that holds 15 C-cell batteries upright and organized in a 3×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
156×93.6×33mm
D Battery Holder Tray — 10-Cell 2×5 Array
A tray that holds 10 D-cell batteries upright and organized in a 2×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
196×78.4×38mm