1/4-20 Tripod Adapter Plate — Universal Spacer
A flat plate with a single clearance hole for a standard 1/4-20 UNC tripod screw, for adding spacing between a tripod head and a camera or device, or as a simple pass-through mounting plate. This is a plain clearance hole, not a threaded socket or a locking quick-release mechanism.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 50 mm |
| Y | 50 mm |
| Z | 5 mm |
About this model
1/4-20 UNC is the universal photography/tripod mounting thread standard, used across essentially all cameras, tripods, and mounting accessories. A simple spacer/adapter plate at this standard is a self-evidently real, common accessory need.
Fit notes
- 50x50mm compact universal adapter plate footprint
- 5mm plate thickness -- rigid enough for a load-bearing camera/tripod connection, not fit-critical
- 6.5mm center hole -- a plain clearance hole for a standard 1/4-20 UNC screw (6.35mm nominal) to pass through, NOT a threaded socket and NOT a locking quick-release mechanism
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- tripod-adapter-plate-quarter20
- Category
- spacers
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /objects/tripod-adapter-plate-quarter20/model.stl
- STEP file
- /objects/tripod-adapter-plate-quarter20/model.step