Vial Holder Tray — 9× 22mm Antibody/Dye Vials, 3×3 Array
A tray that holds 9 cylindrical 22mm-diameter glass vials upright and stable in a 3×3 grid, sized for lab vials used for antibodies or dyes, where a published single/double holder doesn't cover a larger batch.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 81 mm |
| Y | 81 mm |
| Z | 18 mm |
About this model
A published "Vial Holder for antibody/dye vials" (22mm diameter, Printables, by LabWizard) explicitly offers only a single or double holder, with the maker noting "please reach out if you'd like another configuration" -- real evidence of demand beyond the published single/double sizes for the same 22mm vial.
Fit notes
- 1mm clearance per pocket for a neat (not press) fit around each 22mm vial
- 15mm pocket depth -- a stabilizing pocket, not a full-height enclosure
- 3×3 layout (closest-to-square arrangement for 9 items)
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- vial-holder-antibody-22mm
- Category
- holders
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/vial-holder-antibody-22mm/sha256/2379b472ed52237bf9b4e58829c115f5f84cbd04f15ba110290a07ccf5e720c8.stl
- STEP file
- /artifacts/objects/vial-holder-antibody-22mm/sha256/5921f060f659b87b1e0c540d86918b4eaae61aac8dfae7351873328ee3829821.step
Similar objects
AA Battery Holder Tray — 30-Cell 5×6 Array
A tray that holds 30 AA batteries upright and organized in a 5×6 grid, for bulk battery storage in a count that doesn't match the fixed 16/20/25-count presets sold as ready-made holders.
117×97.5×33mm
AAA Battery Holder Tray — 24-Cell 4×6 Array
A tray that holds 24 AAA batteries upright and organized in a 4×6 grid, for bulk battery storage sized exactly to AAA's own diameter rather than a generic multi-size battery organizer.
93×62×28mm
C Battery Holder Tray — 15-Cell 3×5 Array
A tray that holds 15 C-cell batteries upright and organized in a 3×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
156×93.6×33mm
D Battery Holder Tray — 10-Cell 2×5 Array
A tray that holds 10 D-cell batteries upright and organized in a 2×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
196×78.4×38mm