Four-bay open bench locator
Separates loose hand tools or work-in-progress parts into four open staging lanes.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 72 mm |
| Y | 54 mm |
| Z | 4.8 mm |
About this model
Use-case hypothesis for non-critical temporary staging of loose workshop items; no precise fit or load claim.
Fit notes
- Loose-use, non-load-bearing accessory; no mounting, safety, precision fit, food contact or liquid-flow guarantee.
- Physical fit and material-specific performance are untested.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or handling test was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- workshop-bench-locator-4-bay
- Category
- workshop
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/workshop-bench-locator-4-bay/sha256/249b20f3a4e56ec66619029349b25e68da9219db8b6170f2f702c9512e434269.stl
- STEP file
- /artifacts/objects/workshop-bench-locator-4-bay/sha256/ad33af4fd73dc5b0880e29f83b82b2fe726fe346154379f2d0e50a9a409fcb33.step
Similar objects
Open bench transfer chute
Moves dry small parts between adjacent trays along an open guided channel.
36×90.05×12mm
Six-channel open cable comb
Separates loose low-voltage patch and charging leads on a bench.
72×51×9mm
Wide-channel desk cable comb
Separates three thicker desk leads at a shared work position.
64×46×9.25mm
L-turn cable corner guide
Routes a loose cable around a right-angle bench corner without circular holes.
54×54×9mm