Gusseted L-Profile Bookend
Freestanding L-profile with a diagonal gusset and shallow underside toe relief; not load-rated or anti-slip tested.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 112 mm |
| Y | 62 mm |
| Z | 96 mm |
About this model
Issue #30 explicitly identifies this desk/display use as a target; this is prioritization evidence from the request, not independent search-volume or community-demand evidence. Specific demand remains a hypothesis.
Fit notes
- Dimensions and clearances are authored geometry choices, not user-supplied standards.
- No physical fit, strength, anti-slip, or load testing was performed.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
MEDIUM RISK Medium risk — tight tolerances, thin tall walls, or snap-fit style geometry. Read the notes below before printing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. Not physically sampled; actual use and fit remain unverified.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- desk-gusset-bookend
- Category
- desk-display
- Risk classification
- medium
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/desk-gusset-bookend/sha256/3457251a15aa8b4d8957883a4a04ed437e09c6e6edcf4af6202996a86a3cbd1d.stl
- STEP file
- /artifacts/objects/desk-gusset-bookend/sha256/7656006cd443a61667b115a4b0ee55997e179c6a31222e66490ae6efc50d85f8.step
Similar objects
Desktop Letter Divider Rack
Open comb rack with three vertical divider blades for separating letters or small documents into four bays; paper fit is unverified.
112×54×78mm
Open-Book Reading Rest
Inclined support deck with a raised toe and rear return for resting an open book while reading.
132×150×70mm
Single-Slot Desk Nameplate Base
A narrow open groove holds one card or thin nameplate upright; nominal card thickness is stated, not universal fit.
110×30×10mm