Open-Book Reading Rest
Inclined support deck with a raised toe and rear return for resting an open book while reading.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 132 mm |
| Y | 150 mm |
| Z | 70 mm |
About this model
Issue #30 explicitly identifies this desk/display use as a target; this is prioritization evidence from the request, not independent search-volume or community-demand evidence. Specific demand remains a hypothesis.
Fit notes
- Dimensions and clearances are authored geometry choices, not user-supplied standards.
- No physical fit, strength, anti-slip, or load testing was performed.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
MEDIUM RISK Medium risk — tight tolerances, thin tall walls, or snap-fit style geometry. Read the notes below before printing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. Not physically sampled; actual use and fit remain unverified.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- desk-open-book-reading-rest
- Category
- desk-display
- Risk classification
- medium
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/desk-open-book-reading-rest/sha256/4ef02ec49ddeb76419020e6411516c69fe2bb7df6ccadc60cfb7f7998eddf314.stl
- STEP file
- /artifacts/objects/desk-open-book-reading-rest/sha256/f1474339b29a90de79b52b16482f7ae9bd5d180caacec5a82bb02ede1b8146b0.step
Similar objects
Gusseted L-Profile Bookend
Freestanding L-profile with a diagonal gusset and shallow underside toe relief; not load-rated or anti-slip tested.
112×62×96mm
Desktop Letter Divider Rack
Open comb rack with three vertical divider blades for separating letters or small documents into four bays; paper fit is unverified.
112×54×78mm
Single-Slot Desk Nameplate Base
A narrow open groove holds one card or thin nameplate upright; nominal card thickness is stated, not universal fit.
110×30×10mm