Round Bust Display Pedestal
Present a small bust or single round-foot miniature on concentric stepped tiers.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 72 mm |
| Y | 72 mm |
| Z | 24 mm |
About this model
Hypothesis only: a round tiered support is a plausible display and photo prop; demand is not independently established.
Fit notes
- Nominal dimensions are a lane design premise, not user-supplied fit requirements.
- No physical print, fit, strength, or market-demand result is claimed.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. Not physically sampled; actual use and fit remain unverified.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- hobby-pedestal-round-bust
- Category
- hobby
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/hobby-pedestal-round-bust/sha256/b3aadc4c66dc1ac67b545d963774ffc883af7e4346c5f9bfcbed06ad2035c598.stl
- STEP file
- /artifacts/objects/hobby-pedestal-round-bust/sha256/e074f19508942fbb30d7b045dc9053a25a244d8bb47348a7172fa27162f2be9a.step
Similar objects
Fine Detail Brush Rest
Temporarily support small paintbrush handles above a work surface in six shallow saddles.
82×16×13mm
Hex Terrain Marking Template
Trace a repeatable hex grid on scratch-built tabletop terrain.
86×54×2.4mm
Parallel Stripe Guide
Mask and trace four consistent parallel paint or pencil bands.
88×58×2.4mm