Parallel Stripe Guide
Mask and trace four consistent parallel paint or pencil bands.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 88 mm |
| Y | 58 mm |
| Z | 2.4 mm |
About this model
Hypothesis only: a small multi-width stripe guide is useful for craft layout; the target problem has not been independently sourced.
Fit notes
- Nominal dimensions are a lane design premise, not user-supplied fit requirements.
- No physical print, fit, strength, or market-demand result is claimed.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. Not physically sampled; actual use and fit remain unverified.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- hobby-stencil-paint-stripes
- Category
- hobby
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/hobby-stencil-paint-stripes/sha256/bbfa68ffaa83d674478ac3db1a4f49eba741620eb61993af4a92d1c17d6769d0.stl
- STEP file
- /artifacts/objects/hobby-stencil-paint-stripes/sha256/04685a87a7b18ba4878eceab37820b353af19844b63feff28daf8a67ae4fe437.step
Similar objects
Fine Detail Brush Rest
Temporarily support small paintbrush handles above a work surface in six shallow saddles.
82×16×13mm
Round Bust Display Pedestal
Present a small bust or single round-foot miniature on concentric stepped tiers.
72×72×24mm
Hex Terrain Marking Template
Trace a repeatable hex grid on scratch-built tabletop terrain.
86×54×2.4mm