A single triangular wedge intended to be placed under a door edge to hold it ajar
A single triangular wedge intended to be placed under a door edge to hold it ajar.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 108 mm |
| Y | 44 mm |
| Z | 24 mm |
About this model
Hypothesis: a simple floor wedge is a recognizable household doorstop use. No specific request was independently collected, and no holding-force claim is made.
Fit notes
- The model is a plain triangular wedge with no attached fixing feature.
- Floor grip, door clearance, and resistance to load are physically untested.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
MEDIUM RISK Medium risk — tight tolerances, thin tall walls, or snap-fit style geometry. Read the notes below before printing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or fit sample was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- home-doorstop-wedge
- Category
- home-living
- Risk classification
- medium
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/home-doorstop-wedge/sha256/5f1d63c32f3241ee6f65d30da4731d7573f10b90fe8236200a14715eb026bf59.stl
- STEP file
- /artifacts/objects/home-doorstop-wedge/sha256/9a64eb1e5021ef5b261eb85e1ad00b726181c5747983b88072e12ea9275b78cf.step
Similar objects
A bathroom counter stand that rests one handled razor across two raised support bars above an open base
A bathroom counter stand that rests one handled razor across two raised support bars above an open base.
104×58×30mm
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats.
124×82×21mm
A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps
A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps.
76×112×5mm