A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps
A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 76 mm |
| Y | 112 mm |
| Z | 5 mm |
About this model
Hypothesis: bar-soap users want a draining rest that does not use a solid contact surface. No specific request or listing was independently collected.
Fit notes
- The deck is open between rails; rails and end bars form one connected solid.
- No antimicrobial, drying-time, or waterproof claim.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or fit sample was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- home-slatted-soap-rest
- Category
- home-living
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/home-slatted-soap-rest/sha256/a878fd64b99eff41cf5dd2d55c16cdb055fcaa1f877ea01a1c6e2d232e24a594.stl
- STEP file
- /artifacts/objects/home-slatted-soap-rest/sha256/fede58d26b1c7a52ebf0facda31ba35403c3e8f97608d47598ab7f5b0cf90610.step
Similar objects
A single triangular wedge intended to be placed under a door edge to hold it ajar
A single triangular wedge intended to be placed under a door edge to hold it ajar.
108×44×24mm
A bathroom counter stand that rests one handled razor across two raised support bars above an open base
A bathroom counter stand that rests one handled razor across two raised support bars above an open base.
104×58×30mm
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats.
124×82×21mm