Three-post reusable bag loop keeper
Three separated round posts provide loose-loop parking points on a low base.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 104 mm |
| Y | 46 mm |
| Z | 26 mm |
About this model
Hypothesis: households reusing shopping bags want a small countertop loop organizer; no specific request was collected.
Fit notes
- Loops rest loosely around posts; this is not a spring clamp.
- Bag compatibility and retention are not claimed.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or fit sample was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- kitchen-reusable-bag-loop-keeper
- Category
- kitchen
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/kitchen-reusable-bag-loop-keeper/sha256/5de6d53b1372baa875c5669bf93ae144f3b9343b9fe448ee81abc3ee89c8cd22.stl
- STEP file
- /artifacts/objects/kitchen-reusable-bag-loop-keeper/sha256/4c2e1ae70a7ec944068e68c60aa8c1c815302d1c465d34b395dc3dd7e8b129e6.step
Similar objects
Four-lane coaster airing rack
Four raised parallel rails and end bars keep coasters separated in an open rack.
102×84×28mm
Open-front paper filter sleeve stand
A rear stop and two low side rails support a packaged paper-filter sleeve above a flat base.
112×78×66mm
Countertop cleaning-cloth airing rail
Two feet and upright masts support one horizontal open rail for a cleaning cloth.
126×56×78mm
Loose utility-roll cradle
A base with two triangular end supports holds a loose roll above the surface.
136×52×39mm