Open-front deck draw shoe
Stages a loose card deck with a low front stop so the next card can be drawn without opening a box.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 78 mm |
| Y | 104 mm |
| Z | 27 mm |
About this model
Hypothesis: card players need an open draw shoe for a deck in active use; sleeve and deck fit are not claimed.
Fit notes
- Generic, loose-use tabletop accessory; no named-game compatibility or rule standard claimed.
- Fit, handling, and physical performance have not been sampled.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or handling test was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- tabletop-deck-draw-shoe
- Category
- tabletop
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/tabletop-deck-draw-shoe/sha256/f41597fd05ceb83110b7f6f308e8019a1bf2034e8ebc22671892c8836c4e5698.stl
- STEP file
- /artifacts/objects/tabletop-deck-draw-shoe/sha256/7b5fd5d779ab1666eb4b33b1c7d9c534e9d011864f559a594920c517cf932604.step
Similar objects
Marked tabletop area boundary ring
Marks an annular tabletop area boundary with twelve raised orientation ticks.
100×100×3.2mm
Splayed-wall dice catch tray
Catches loose dice in a shallow tray whose side walls flare outward for rebound space.
98.588×92×19.137mm
Open dice tower with alternating baffles
Rolls tabletop dice through a one-piece tower and out a low retrieval opening.
60×60×120mm
Open hex terrain tile edge gauge
Uses five raised perimeter rails to loosely register a generic hex terrain tile while leaving one edge open for access.
62.598×54.962×6mm