Splayed-wall dice catch tray
Catches loose dice in a shallow tray whose side walls flare outward for rebound space.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 98.588 mm |
| Y | 92 mm |
| Z | 19.137 mm |
About this model
Hypothesis: players who do not want an enclosed dice tower need an open dice catch tray; no specific request was verified.
Fit notes
- Generic, loose-use tabletop accessory; no named-game compatibility or rule standard claimed.
- Fit, handling, and physical performance have not been sampled.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or handling test was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- tabletop-dice-catch-tray
- Category
- tabletop
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/tabletop-dice-catch-tray/sha256/04df270ef2493a939b671f51aaf3cbaa9f6f2c7552abbf1e9314decfd0d31900.stl
- STEP file
- /artifacts/objects/tabletop-dice-catch-tray/sha256/25379e2d80e343bc67f04cf3aa46b561f3e5a2f39193974602692a98ab85ab18.step
Similar objects
Marked tabletop area boundary ring
Marks an annular tabletop area boundary with twelve raised orientation ticks.
100×100×3.2mm
Open-front deck draw shoe
Stages a loose card deck with a low front stop so the next card can be drawn without opening a box.
78×104×27mm
Open dice tower with alternating baffles
Rolls tabletop dice through a one-piece tower and out a low retrieval opening.
60×60×120mm
Open hex terrain tile edge gauge
Uses five raised perimeter rails to loosely register a generic hex terrain tile while leaving one edge open for access.
62.598×54.962×6mm