Open 32 mm miniature base placement guide
Provides a loose C-shaped visual boundary for positioning a nominal 32 mm round miniature base.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 50.393 mm |
| Y | 52 mm |
| Z | 4 mm |
About this model
Hypothesis: miniature hobbyists need a low-profile open placement guide; dimensions do not claim compatibility with a named game base.
Fit notes
- Generic, loose-use tabletop accessory; no named-game compatibility or rule standard claimed.
- Fit, handling, and physical performance have not been sampled.
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested. No physical print or handling test was performed.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- tabletop-miniature-base-guide-32mm
- Category
- tabletop
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /artifacts/objects/tabletop-miniature-base-guide-32mm/sha256/6f2faa4e7029e2ebd91ceddd4aed7ee9ffd3632a079203048ac2a81441948b83.stl
- STEP file
- /artifacts/objects/tabletop-miniature-base-guide-32mm/sha256/5d7ece89688eb4afd6ec1ece0f68a11ca48c2ce8ed0320415c5e344de422c3c5.step
Similar objects
Marked tabletop area boundary ring
Marks an annular tabletop area boundary with twelve raised orientation ticks.
100×100×3.2mm
Open-front deck draw shoe
Stages a loose card deck with a low front stop so the next card can be drawn without opening a box.
78×104×27mm
Splayed-wall dice catch tray
Catches loose dice in a shallow tray whose side walls flare outward for rebound space.
98.588×92×19.137mm
Open dice tower with alternating baffles
Rolls tabletop dice through a one-piece tower and out a low retrieval opening.
60×60×120mm